$Id: CHANGELOG.txt 1632 2012-12-30 00:00:27Z tk $

MIDIbox KB V1.007
~~~~~~~~~~~~~~~~~

   o srio_num now stored on EEPROM

   o changed default delay settings (required after performance fix in v1.006)

   o added ain_sustain and ctrl_sustain parameters

   o the min/max values of the potentiometers can now be calibrated with the
       set kb <kb> calibrate <off|pitchwheel|modwheel|sustain>
     command.


MIDIbox KB V1.006
~~~~~~~~~~~~~~~~~

   o fix for SRIO scan performance issue


MIDIbox KB V1.005
~~~~~~~~~~~~~~~~~

   o USB device settings have been changed.
     IMPORTANT: please install MIOS32 Bootloader V1.010 before uploading
     the application! Otherwise code upload via USB won't work anymore!
     (Backup: upload via MIDI IN1/OUT1)

   o 4 USB ports are enabled now.
     Note: if your operating system still displays only a single MIDI port for USB,
     then unplug the USB cable and remove the USB MIDI driver in your system setup,
     so that the driver be installed again once the core module has been re-connected.
     E.g. under MacOS this can be done with the Audio-MIDI Setup application
     (search for "Audio" in Spotlight)

   o support for GM5 driver under Windows.
     - upload the application with MIOS Studio
     - close MIOS Studio
     - install the GM5 driver which can be downloaded from http://www.ucapps.de/mios32_download.html
     - start MIOS Studio -> 4 "GM5" USB ports should be visible


MIDIbox KB V1.000
~~~~~~~~~~~~~~~~~

This is the initial version with only a subset of planned functions:
  - scans up to two keyboards with optional velocity and individually assignable types
  - supports seven different keyboard types: NoVel8x8, NoVel16x8, NoVel16x16, Vel8x8, Vel16x8, Vel16x16, KorgMicroKontrol
    (list can be easily enhanced in future)
  - 4 USB-MIDI Ports and 4 UART based MIDI IN/OUT
  - integrated MIDI router with 16 nodes
  - integrated MIDI monitor
  - OSC via Ethernet

Next steps:
  - PitchBender connected to J5A.A0
  - Modulation wheel connected to J5A.A1
  - 4 additional pots/faders connected to J5A.A2, J5A.A3, J5B.A4 and J5B.A5
  - MIDI channel, MIDI Port destinations and CC numbers can be configured in MIOS Terminal
  - settings are stored in on-board EEPROM of LPCXPRESSO module
